CHARGOMATIC G1-300

  • Battery charger
  • primary switched
  • Case
6 V  5 A  24 V  2,5 A  
12 V  2 A  36 V  1,5 A  
12 V  4 A  48 V  1 A  
12 V  5 A  


Description

Functional description
The chargers of the G1-300 series are designed in the primary switch mode technology. A constant DC voltage with low AC voltage component during the charging process ensures a maximum lifetime of maintenance-free lead batteries.

Mechanical design
All components are mounted on the circuit board which is installed in a plastic case. The mains is connected by a cable with Euro plug. A LED indicates that charging current is flowing. A second LED indicates that the battery is full. The secondary cable is 1.5 m long with free ends. By request plugs can be mounted.

Certification and CE marking
The devices meet the basic requirements of the law relating to electromagnetic compatibility.

89/336/EEC, EMC directive, 73/23/EEC low voltage directive.

CCA certification of the SEV
(Cenelec Certification Agreement) in accordance with standards
EN 60335-2-29: 91 + A2: 93, EN 60555-2 : 87,
EN 50081-1: 92 (einschl. EN 55022),
EN 50082-1: 92 (einschl. IEC 801-2, IEC 801-2, IEC 801-4).

Characteristics
In the margin is an example of a charging device characteristic of the charging device type G1-324-2, 5, 24 V 2.5 A, with IUoU curve, 2-step charging, 1st level 28.8 V (2.4 V / cell), reaching the 2 Step (float) 27.6 V (2.3 V / cell) after 12 hours.

Features

  • Current limit, short circuit protected
  • reverse polarity protection, reverse polarity display
  • Surge protection
  • Charging indicator
  • low weight
  • Charging of deeply discharged batteries (<1 V / cell)
Dial Engineering AG · Langfeldstrasse 96 · CH-8500 Frauenfeld · Tel. +41 52 723 0575 · Fax +41 52 723 0576 · info@dial-eng.ch

A TreeCone Group Company · www.TreeCone.ch
© 2018