CHARGOMATIC G0-300

  • Battery charger
  • primary switched
  • Case
6 V  2 A
12 V  2 A
24 V  1 A


Description

Functional description
The chargers of the G0-300 series are designed in the primary switch mode technology. A constant DC voltage with low AC voltage component during the charging process ensures a maximum lifetime of maintenance-free lead batteries.

Mechanical design
All components are mounted on the circuit board which is installed in a plastic case. The mains connection is made via a rubber connector. A multi-color LED indicates that charging current is flowing, the battery is full and whether the battery is connected with reversed polarity. The secondary cable is 1.5 m long with free ends.

The case is completely closed and thus corresponds to the yprotection class IP 54. The devices can be supplied with a bracket for wall mounting.

Certification and CE marking
The devices meet the basic requirements under the act of electromagnetic compatibility.

89/336/EEC, EMC directive, 73/23/EEC low voltage directive.

Features

  • Current limit, short circuit protected
  • reverse polarity protection, reverse polarity display
  • wide input voltage range
  • surge protection
  • low weight
  • Charging of deeply discharged batteries (<1 V / cell)

Data

General technical data

Device type G0–306–2 G0–312–2 G0–324–1
Rated voltage DC 6 V 12 V 24 V
Nominal output current DC 2 A 2 A 1 A
Voltage first charge level 7,2 V 14,4 V 28,8 V
Voltage second charge level 6,9 V 27,6 V
Short circuit current < 2 A < 2 A < 1 A
characteristic IUoU
Load regulation consum EN 55014
Protection class II/VDE 0805
Protection IP 54
Reverse polarity elektrisch
Back current at power failure ca. 2,5 mA
Main voltage AC, 50/60 Hz 100 - 240 V ± 15%
Input current at 230 V approx. 0,4 A
Switching frequency 30 kHz
efficiency approx. 0,80 0,81 0,83
Ambient temperature range 0º C / +35º C
Spikes about * 0,5% pp
Output voltage ripple around 0,5% pp
Accuracy of the output voltage between 195-265 V approx. 0,2%
Battery output load regulation at 80% Nominal output current approx. * 2%
Cooling Convection
Weight approx. 300 g
Dimensions (L x B x H) 122 x 68 x 58 mm


measured at the device output
Dial Engineering AG · Langfeldstrasse 96 · CH-8500 Frauenfeld · Tel. +41 52 723 0575 · Fax +41 52 723 0576 · info@dial-eng.ch

A TreeCone Group Company · www.TreeCone.ch
© 2018